MotionAir CO2 Canister
Compressed CO2 canisters, which are suitable for use in the MotionAir air jacket. The MotionAir comes with one Helite canister on purchase, but for replacements, be sure to use a branded canister, as we cannot account for the efficacy/compatibility of other brands of canisters.
Available in 2 sizes to provide effective protection according to the airbag volume. MotionAir YR1 uses the 50cc canister. YR2, A1 & A2 use the 60cc canister size.
The system can be reactivated by yourself within a few minutes without any special knowledge required. In the event of a fall, replace the empty canister with a new one as shown here.
Helite canisters come with a 10-year warranty and do not have an expiration date. One canister is always included with your airbag. We recommend having one additional canister that you can quickly replace in case of a fall.
For safety reasons, we ask you to check your airbag on an annual basis: Unscrew and weigh your CO2 canister on a scale. Please make sure it is approximately +/- 3g for 50CC and 60CC canisters to the weight written on your canister.
Please find below some precautions for your canisters:
✓ Use only Helite brand canisters.
✓ The canister is for single use only. You must replace the canister with the same type after each inflation.
✓ If rust or other corrosive marks appear on the outer surface of the canister, change it immediately and contact us.
✓ The canister should be stored and used in temperatures below 45°C. Do not expose the full canisters for a long time to high temperatures (in direct sunlight, near a radiator, etc.).
✓ The canister must be used at a temperature over 0°C. If stored under 0°C, warm up before use or replace it with a canister stored at room temperature.
✓ Avoid shocks to the canister, this could damage it.
✓ The used or damaged canister will have to be recycled or disposed in accordance with your country’s legislation